Additives
Soapmaking additives: uses and precautions
Sodium lactate, sugar, salt, citric acid, clays, pigments, antioxidants, chelating agent and botanical powders: how each additive is used and what to watch for.
Sodium lactate
INCI: Sodium Lactate
Use
Commonly around 1–3 % of the oil weight, added to the cooled lye solution.
Particularities & precautions
Helps produce a harder bar that unmolds more easily.
Sugar
INCI: Sucrose
Use
Small amounts, dissolved in the water before adding NaOH.
Particularities & precautions
Boosts lather. Increases heat during saponification.
Salt
INCI: Sodium Chloride
Use
A little salt hardens the bar; “salt bars” use much larger amounts.
Particularities & precautions
Large amounts reduce lather; salt bars are usually cut early because they harden fast.
Citric acid (anhydrous)
INCI: Citric Acid
Use
Small amounts, dissolved in the water before adding the alkali.
anhydrous: 0.6246 g of NaOH or 0.8761 g of KOH per gram (added automatically).
monohydrate: 0.5710 g of NaOH or 0.8010 g of KOH per gram (added automatically).
Source of the factor: Stoichiometry: C6H8O7 is a triacid (3 mol OH⁻ per mol); M = 192.12 g/mol (anhydrous), 210.14 g/mol (monohydrate)
Particularities & precautions
Neutralizes part of the alkali. APISARA adds it automatically: 0.625 g NaOH (0.876 g KOH) per g of anhydrous citric acid, 0.571 g NaOH (0.801 g KOH) per g of monohydrate. Choose the form on the recipe line, as written on the supplier’s label.
Kaolin (white clay)
INCI: Kaolin
Use
Small amounts, pre-dispersed in a little water or oil.
Particularities & precautions
Gentle clay that gives a silky feel. Clays absorb water.
Green clay
INCI: INCI unknown (not given by the source)
Use
Small amounts, pre-dispersed in a little water.
Particularities & precautions
The INCI name depends on the clay type (e.g. Illite or Montmorillonite): use the supplier’s name.
Activated charcoal
INCI: Charcoal Powder
Use
Very small amounts give a deep gray to black color.
Particularities & precautions
Too much can make gray lather.
Titanium dioxide
INCI: CI 77891
Use
Small amounts, well dispersed beforehand (water- or oil-dispersible grade).
Particularities & precautions
White pigment. Poor dispersion can leave white specks.
Iron oxides
INCI: CI 77491 / CI 77492 / CI 77499
Use
Small amounts, pre-dispersed.
Particularities & precautions
Stable mineral pigments. The CI number depends on the color (red, yellow, black).
Colloidal oatmeal
INCI: Avena Sativa Kernel Flour
Use
Added at trace, in small amounts.
Particularities & precautions
Often used in soaps meant to feel gentle.
Honey
INCI: Mel Not vegan
Use
Small amounts, often diluted and added at trace.
Particularities & precautions
Sugars raise the temperature of the batter and can darken the soap. Not vegan.
- Animal origin: not suitable for vegan soaps.
Rosemary extract (antioxidant)
INCI: Rosmarinus Officinalis Leaf Extract
Use
Added to the oils, at the rate given by the supplier.
Particularities & precautions
Helps slow down the oxidation of fragile oils. It does not replace fresh oils.
Open “Rosemary extract (antioxidant)” in the APISARA calculator ↗
Vitamin E (tocopherol)
INCI: Tocopherol
Use
Added to the oils, at the rate given by the supplier.
Particularities & precautions
Antioxidant for the oils.
GLDA (chelating agent)
INCI: Tetrasodium Glutamate Diacetate
Use
Very small amounts, at the rate given by the supplier.
Particularities & precautions
Binds metal ions from hard water; helps limit soap scum and oxidation spots.
Ground coffee
INCI: Coffea Arabica Seed Powder
Use
Added at trace as an exfoliant.
Particularities & precautions
Check the INCI name with your supplier (it depends on the coffee species).
Turmeric powder
INCI: Curcuma Longa Root Powder
Use
Small amounts for a yellow to orange color.
Particularities & precautions
Too much can give speckles or tint the lather.